Exterior Painter Colorado Springs | ColorCraze Pro Painting

CORE SERVICE · ALTITUDE-RATED

Exterior painting, built for Colorado walls.

Altitude-rated paint systems. UV-tough prep. Exterior work that holds seven years, not three.

Colorado sun eats standard exterior paint in three or four years. We use altitude-rated acrylic systems, substrate-matched primers, and prep that accounts for stucco, cedar, cement board, and brick — so the finish holds. Backed by a 2-year written warranty.

(719) 413-7933 See the Process

Our Trade

Colorado sun eats exterior paint.

At 6,000 to 7,200 feet, the atmosphere is thinner and drier, and the UV index runs consistently higher than almost anywhere in the country. Standard big-box exterior latex — the stuff most crews throw up because it's cheap and fast — fades, chalks, and starts peeling on south- and west-facing walls inside three to four years. That's not a labor issue. That's the paint.

We use altitude-rated 100% acrylic exterior systems with Class A UV protection. Heavier resin loads, tighter pigment binders, UV inhibitors engineered for high-elevation exposure. Properly applied on properly prepped walls, these systems hold seven-plus years before they need any attention — and the first attention is usually a wash, not a repaint.

The other half of the job is prep, and prep is substrate-specific. Stucco needs a masonry primer and elastomeric crack-fill. Cedar and wood siding need scrape, spot-prime, and a stain-blocking undercoat. Cement board needs a bonding primer that keys to the factory finish. Brick, when it gets painted at all, needs a breathable mineral-silicate system. One prep recipe doesn't work for all four — and skipping the match is why most exterior repaints fail early.

The Process

Four steps, no shortcuts.

Free Estimate · 5–10 Day Typical Home

Before — exterior photo placeholder

Swap for real before photo

After — exterior repaint placeholder

Swap for real after photo

Walk-around assessment

On-site with Jonathan. Substrate ID (stucco, cedar, cement board, brick), inspection of south- and west-facing trouble spots, chalk test, caulk and trim-board condition notes, and a color-match conversation — HOA approval process if the neighborhood requires it.

Free · On-Site

Power wash

Full-house pressure wash to pull off chalk, pollen, mineral deposits, and any failing topcoat. We let the siding dry fully — usually 24 to 48 hours depending on elevation and humidity — before any prep tools touch the wall. Paint over damp substrate is paint that peels.

Day 1

Prep — scrape, caulk, prime

Hand-scrape any loose or peeling areas, feather-sand the edges, re-caulk window and trim joints, patch stucco hairlines with elastomeric, and spot-prime every bare spot with a substrate-matched bonding primer. Masking for windows, lights, and landscape goes up in this same pass.

Day 2–4

Paint — spray + back-brush, two coats

Two full finish coats in altitude-rated acrylic. Sprayed for even film build, then back-brushed or back-rolled into the substrate so the paint mechanically bonds, not just floats. Trim and accent work cut in by hand. Final walk-through, warranty paperwork, and site cleanup before we leave.

Day 4–10

Why It Holds

Three reasons our exterior finish lasts.

UV-Rated Resin

Standard exterior latex isn't built for 6,000 feet. Thinner air, drier conditions, and a UV index consistently higher than sea level chew up cheap resin systems in three or four years — you see it as chalking, color fade, and peeling on south- and west-facing walls first. We use altitude-rated 100% acrylics with Class A UV protection, formulated to hold color and film integrity at Colorado elevation.

Substrate-Matched Primer

Stucco isn't cedar. Cedar isn't cement board. Cement board isn't brick. Each substrate needs its own primer chemistry — a masonry-bonding primer for stucco and efflorescent spots, a stain-blocking primer for cedar knots, a factory-finish bonding primer for cement board, and a breathable mineral-silicate system for the rare painted brick. Using one primer for all four is why most exterior repaints fail inside four years.

2-Year Written Warranty

Every exterior job is backed by a 2-year written warranty against peeling, flaking, and premature workmanship failure. Written into your estimate, not a verbal promise at the end of the call. If something goes wrong on a finish we sprayed — within the warranty period, on our workmanship — we come back and make it right.

“

Jonathan painted our stucco exterior three years ago — it still looks like the day he finished. His prep work showed.

Google Review · Black Forest, CO

§ Placeholder quote — swap for real review before publish

Exterior FAQs

What Colorado homeowners ask before they book.

What type of exterior paint holds up to Colorado altitude and UV?

Altitude-rated 100% acrylic systems with Class A UV protection. At 6,000 to 7,200 feet, the air is thinner, drier, and the UV index runs consistently higher than sea level — standard exterior latex fades and chalks in three to four years. Altitude-rated acrylics use heavier resin loads, tighter pigment binders, and UV inhibitors engineered for high-elevation exposure. Properly prepped and applied, they hold their color and adhesion for seven-plus years on Colorado exteriors.

How often should I repaint my Colorado exterior?

With altitude-rated acrylic on a properly prepped substrate, expect seven to ten years before a full repaint is warranted. With standard big-box exterior paint, expect three to four years before noticeable fading, chalking, and peeling on south- and west-facing elevations. The difference is almost entirely the paint system plus the prep — not the labor.

Do you paint stucco exteriors?

Yes — stucco is a common Colorado Springs substrate and the prep is different from wood or cement board. We pressure-wash to remove chalk and mineral deposits, hand-patch any hairline cracks with an elastomeric filler, spot-prime bare or efflorescent areas with a masonry-bonding primer, then spray and back-roll two finish coats of an elastomeric or breathable acrylic system. Skipping the masonry-primer step is the single most common reason exterior stucco paint fails early.

When is the season for exterior painting in Colorado?

Typically April through October, depending on the week's weather. What matters isn't the calendar — it's the temperature. Most exterior acrylics need surface and air temperatures above 50°F during application and for at least four hours after, with overnight lows that don't crash below 35°F. In Colorado Springs that window usually runs mid-April through mid-October, with some shoulder-season flexibility on warm-pocket weeks. We don't rush a job against weather — the finish pays for it later.

Do HOAs need to approve exterior colors?

Many do — Black Forest, Cimarron Hills, and several Colorado Springs neighborhoods have active HOA color-approval processes. We've run the submission process with homeowners before: pulling paint-chip samples, filling out the HOA color-approval form, and in some cases painting a 4x4 test patch on the house for the board to sign off on. It adds a week or two to the timeline but saves the repaint-it-the-right-color nightmare. Call (719) 413-7933 if you're in an HOA neighborhood and we'll talk through what your board wants.

—— Free Exterior Estimate · Colorado Springs · Pueblo ——

Give your exterior a seven-year coat.

Call Jonathan directly for a free on-site exterior painting estimate. Walk-around, substrate check, paint-system recommendation, honest number — no lead-form runaround, just a painter on the other end of the line.

(719) 413-7933 Email Jonathan

ColorCraze Pro Painting · Exterior Painting · Colorado Springs, CO · (719) 413-7933