Decks + fences, restored.
We refinish decks, fences, and outdoor wood across Colorado Springs and Pueblo. Old stain comes off, the wood goes back to bare, and a penetrating oil stain goes on — two coats, end-sealed, and backed by a written 2-year warranty.
Colorado's climate eats wood.
At 6,000 feet, a deck gets hit from every direction. Summer sun is harsher because there's less atmosphere between the wood and the UV. Winter brings freeze-thaw cycles that drive moisture into the grain, expand it, and push old stain up and off in flakes. And the air is so dry that unprotected wood checks, cracks, and silvers faster here than almost anywhere at sea level. An untreated Colorado deck isn't weathering slowly — it's actively failing every season.
Which is why the prep matters more than the product. A premium stain brushed over a failing finish is just a new color over the same problem — it'll fail on the old finish's timeline, not the new stain's label claim. We don't recoat over failing stain. We strip it. Every job starts with pulling the old finish off, sanding the boards back to raw wood, and giving the stain a clean, open surface to penetrate into. That's the only way a refinish actually holds.
From there, it's two coats of penetrating oil stain, end-grain seal on every cut, and a written 2-year workmanship warranty. Decks come back every 4 to 5 years for a full refinish. Fences a little longer, depending on exposure. That's the cadence for wood that lasts — not the one the can promises.
Four steps, no shortcuts.
Inspection & scope
Strip & sand to raw wood
Stain — 2 coats + end-seal
Final inspection & warranty
Three kinds of outdoor wood, one standard of finish.
Decks
Full deck refinishes — surface boards, railings, stairs, and skirts. We strip, sand, and stain across every species we see in Colorado yards: cedar, redwood, and pressure-treated pine. Horizontal surfaces get the full 2-coat build with end-seal at every cut.
- Cedar
- Redwood
- Pressure-treated pine
Fences
Privacy fences, ranch fences, and long property-line runs. We restain fence panels on existing frames or refinish after repair. Same prep discipline as a deck — strip failing stain, sand to bare, then 2 coats of penetrating oil stain for UV and moisture protection.
- Privacy fences
- Ranch fences
- Property-line runs
Outdoor Wood
Pergolas, benches, arbors, garden structures, and built-in outdoor furniture. Smaller footprint, same careful finish — stripped back to bare, stained to match the surrounding hardscape, and sealed so the piece reads as part of the yard rather than an afterthought.
- Pergolas
- Benches
- Garden structures
Jonathan stripped and restained our 15-year-old cedar deck — it looks better than the day it was built. We thought we'd have to replace it.
What homeowners ask us before they book.
How often should I restain my deck in Colorado?
If the deck is stripped to bare wood and stained correctly, plan on a full refinish every 4 to 5 years in Colorado. If the old stain was simply re-coated without stripping, you'll be chasing failures every 2 years — that's not a warranty issue, that's a prep issue. Our dry-freeze cycle, high-UV sun, and thin air beat the finish harder than sea-level climates, so the cadence here is shorter than the product label claims.
Can you stain over existing stain?
No — not the way we do it. If the existing stain is failing (and on Colorado decks, it almost always is), we strip it off first. Painting over a failing stain means the new coat fails on the same timeline as the old one. We strip, sand to bare wood, then apply penetrating oil stain so the wood absorbs it and the finish actually holds. Prep you don't skip — that's what makes the next 4–5 years possible.
What stain brands do you use?
We spec premium penetrating oil-based stains from established manufacturers — the specific product depends on the wood species, exposure, and the look you want (transparent, semi-transparent, semi-solid, or solid). Oil-based penetrating stains soak into the wood fibers and protect from within, rather than sitting on top like a film-forming product. In Colorado UV, that difference matters a lot — film-forming stains peel, penetrating stains fade evenly. Jonathan will walk you through the options on-site and match product to project.
Do you refinish fences?
Yes. Privacy fences, ranch fences, property-line runs, and mixed-height fences are all regular work for us across Colorado Springs and Pueblo. Same process as decks — assess condition, strip failing stain, sand to bare, then 2 coats of penetrating oil stain. Fences don't take the same foot traffic as a deck, so they go a little longer between refinishes, but the prep standard is identical. The 2-year warranty applies on fences, too.
Keep your wood another five years.
Call Jonathan directly for a free on-site deck or fence staining estimate. Walk-through, honest assessment, real number — no lead-form runaround, just a painter on the other end of the line.
/filters:strip_exif()/filters:no_upscale()/media/d1977fc0-c1d8-48d1-8f7b-5bdcc5a3f36e.jpeg)
/filters:strip_exif()/filters:no_upscale()/media/c8e9a1f0-ffb6-424b-aa4a-56e8bab3fe9b.jpeg)
/filters:strip_exif()/filters:no_upscale()/media/60dadbef-09a7-4cda-a470-623d5ab8bd43.png)
/filters:strip_exif()/filters:no_upscale()/media/c2e5c518-9fbd-489c-a04b-38e4d970f7e0.jpeg)
/filters:strip_exif()/filters:no_upscale()/media/8e36ee83-76c8-41c1-9bf9-384fe0593d3c.png)